Computer Accessories User Manual

256 Appendix C MX5X CE .NET 4.2

MX5X Reference Guide E-EQ-MX5CERG-F-ARC

Scanner

Access: Start | Settings | Control Panel | Scanner

Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.

Assign baud rate, parity, stop bits and data bits for available COM ports. Scanner parameters

apply to the MX5X integrated scanner/imager only. Barcode manipulation parameters apply to

barcodes scanned by the integrated scanner/imager engine only.

Scanner configuration can be changed using the Scanner Control Panel or via the LXE API

functions. While the changed configuration is being read, the Scanner LED is solid amber. The

scanner is not operational during the configuration update.

Determine Your Scanner Software Version

Note: Scanner control panel options are based on the installed software version levels, driver

and OS versions in MX5X devices. Your Scanner options may or may not be as described

in this section. Contact your LXE representative to obtain the most current software and

drivers for your mobile device. To identify the software version, go to Settings | Control

Panel | Handheld | Versions tab.

If the Scanner Control panel looks like this . . . . Go to . . . .

This chapter, this

section titled Scanner

Chapter 4 Scanner

Determine Your Scanner Software Version