Computer Accessories User Manual

290 AppLock - Single Application Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
AppLock - Single Application Configuration
Access: | Settings | Control Panel | Administration icon
LXE’s AppLock is designed to be run on LXE certified Windows CE .NET / CE based devices
only. LXE loads the AppLock program as part of the LXE customer installation process.
Configuration parameters are specified by the AppLock Administrator for the mobile device end-
user. AppLock is password protected by the Administrator.
End-user mode locks the end-user into the configured application. The end user can still reboot the
mobile device and respond to dialog boxes. The administrator-specified application is
automatically launched and run in full screen mode when the device completes the boots up
process.
When the mobile device is reset to factory default values, for example after a cold reset, the
Administrator may need to reconfigure the AppLock parameters.
AppLock is updated periodically as new options become available. Contact your LXE
representative for assistance, downloads and update availability.
Determine Your AppLock Version
If the Administrator Control Menu looks like this . . . Go to . . . .
Control
Status
Security
Administrator Control
This appendix.
Chapter 6 - AppLock
Determine Your AppLock Version