Computer Accessories User Manual

AppLock - Single Application Configuration 293
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Single Application Configuration
The default Administrator Hotkey sequence is Shift+Ctrl+A.
Administrator mode allows access to all features on the device. When the hotkey is pressed to
switch into Administrator mode, a password prompt is displayed (if a password has been
configured). A password must be entered within 30 seconds (and within three tries) or the
password prompt is removed and the device remains in end-user mode with the focus returned to
the locked application. Without entry of a valid password, the switch into Administrator mode will
not occur.
The password prompt is displayed if a password has been configured. When the valid password is
entered, the Administration Control panel is displayed. When a valid password is not entered
within 30 seconds, the user is returned to the System Control Panel.
If a password has not been configured, the Administrator Control panel is displayed.
Administrator Control Panels
Access: Start | Settings | Control Panel | Administration icon
A mobile device running the Single Application version of AppLock becomes a dedicated, single
application device. In other words, only the application or feature specified in the AppLock
configuration by the Administrator is available to the user.
Administrator Control Panels – Single Application