Computer Accessories User Manual

18 Assembly
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
Install Handstrap
Note: The handstrap cannot be used/installed when the MX5X has the trigger handle installed
at the same time.
An elastic hand strap is available for the MX5X. Once installed, the hand strap provides a means
for the user to secure the computer to their hand. It is adjustable to fit practically any size hand and
is easily moved to allow installation or removal of the MX5X battery pack.
Figure 1-13 MX5X With Handstrap Installed
Installation
1. If a handle is installed, remove it at this time. See section Install Pistol Grip Handle.
2. Slip the strap through the upper bracket prior to securing the upper bracket to the unit.
Figure 1-14 Upper Strap Bracket
3. When slipping the strap through the bracket make sure the closed loop fastener surface is up.
4. After slipping the strap through the bracket, fold the strap over so that the two closed loop
fastener surfaces mate evenly.