Computer Accessories User Manual

E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Chapter 3 System Configuration
Introduction
There are several different aspects to the setup and configuration of the mobile device. Many of
the setup and configuration settings are dependent upon the optional features such as hardware and
software installed on the unit. The examples found in this chapter are to be used as examples only,
as the configuration of your specific mobile device may vary. The following sections provide a
general reference for the configuration of the mobile device and some of it’s optional features.
Your MX5X operating system may be Windows CE .NET 4.2 or Windows CE 5.0. This chapter
presents information and procedures for Windows CE 5 only. The MX5X operating system is
displayed on the Desktop. This is the factory default value for the Desktop Display Background.
Windows CE .NET 4.2 information and procedures are contained in Appendix C – MX5X CE
.NET 4.2.
Windows Operating System
For general use instruction, please refer to commercially available Windows CE
5.0 user’s guides or the Windows on-line Help application installed in the mobile
device.
This chapter’s contents assumes the system administrator is familiar with Microsoft Windows
options and capabilities loaded on most standard Windows 2000 (or later) desktop computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the
MX5X and it’s Windows CE environment.
Network Configuration
Summit client 2.4GHz network configuration is included in Chapter 5 – Wireless Network
Configuration. Instruction for Cisco and Symbol clients is located in Appendix C MX5X CE .NET
4.2 section titled Wireless Network Configuration.
Installed Software
Note: Some standard Windows options require an external modem connection. Modems are not
available from LXE nor supported by LXE.
When you order a mobile device you receive the software files required by the separate programs
needed for operation and wireless communication. The files are loaded by LXE and stored in
folders in the mobile device. This section lists the contents of the folders and the general function
of the files. Files installed in the mobile device are specific to the intended function of the mobile
device.
Files installed in each mobile device configured for a wireless network environment contain
wireless client specific drivers – the drivers for each type of client are specific to the manufacturer
(e.g. Cisco, Symbol, Summit) for the clients installed in the RF environment and are not
interchangeable.