Computer Accessories User Manual

Control Panel Options 79
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Handheld
Access: | Settings | Control Panel | Handheld
Displays hardware, communications, versions and WLAN client details.
How to Disable Touch and / or Calibration upon Cold Reset
Access: | Settings | Control Panel | Handheld | Misc tab
Use this option to disable the touch panel. It can also be used to disable the touch screen
calibration configuration during a Cold Reset. When touch is disabled, the keypad must be used
for input. The Input Panel cannot be used.
Disable Touch Panel and Calibration
Access: My Computer | System
Create a file on the CF card (My Computer\System folder) named DisableTouchScreen.dat. If this
file is present on the CF card, the touch screen will be disabled, and calibration will NOT be
requested upon a cold reset.
Disable Touch Panel Only
Access:
| Settings | Control Panel | Handheld | Misc tab
To just disable the touch panel (calibration still required upon cold reset), enable (tap) the Touch
Panel Disabled checkbox on the Misc tab in the Handheld Properties Control Panel.
When checked, the touch panel is disabled. When touch is disabled, the keypad must be used for
input. The Input Panel cannot be used.
How to Re-enable Touch and / or Calibration upon Cold
Reset
Access: My Computer | System
To enable Touch Panel and Calibration, delete the file named DisableTouchScreen.dat on the CF
card (My Computer\System folder). When this file is present on the CF card, the touch screen is
disabled, and calibration does not occur after a cold reset.
To enable the Touch Panel only, uncheck the Touch Panel Disabled checkbox on the Misc tab in
the Handheld Properties Control Panel (Start/Settings/Control Panel/Handheld/Misc tab).