Installation Guide

A. Back

1 piece

B. Seat

1 piece

LY & S Assembly Instructions

Manual Recliner / Glider

IMPORTANT NOTE

Read these instructions carefully, and familiarize yourself with

each procedure before assembling the furniture. Check that you

have all the component parts, and familiarize yourself with each

part before proceeding.

Take all the fittings out of the plastic bag and separate them into

groups. Ensure you have enough space to lay out all the parts

before assembly. To prevent damage to the parts, we recommend

that you assemble the unit on a soft, level surface.

Part List

1/2

PAGE 1
LY & S Assembly Instructions Manual Recliner / Glider IMPORTANT NOTE Read these instructions carefully, and familiarize yourself with each procedure before assembling the furniture. Check that you have all the component parts, and familiarize yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into groups. Ensure you have enough space to lay out all the parts before assembly.
PAGE 2
LY & S Assembly Instructions Assembly Instructions STEP 1 STEP 2 Attach the Back (A) to the Seat (B). Ensure the latches fit well. (See Figure 1.) Fasten the back flap to the bottom of the furniture. (See Figure 2.) A B Figure 1 Figure 2 IMPORTANT NOTE · To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately. · To ensure proper performance, occasionally check for loose screws and tighten as needed.