User's Manual

Page 21 of 34
3.18TTN Device tt8XXX
TTN Device displays the control features special to the device and enables to define settings
necessary for the use of additional devices.
All settings must be defined before starting any application.
ComPower Tab
ComPower enables you to control Power Supplies (PSU) of the serial devices which are
connected to the corresponding Com Ports.
If the checkbox is unchecked, that means:
Com Open Command in Software => Open Com Port
Com Close Command in Software => Close Com Port
If the checkbox is checked, that means:
Com Open Command in Software => Turn on PSU + Open Com Port
Com Close Command in Software => Close Com Port + Turn off PSU
At delivery, the COM ports are configured as follows:
COM1 free available over Honda connector
COM2 Infrared
COM3
COM4 internal scanner
COM5 for external devices such as Powerscan, RFID or external GPS mounted
in Backpack
COM6 internal GPS
DeviceLock Tab
DeviceLock enables you to lock or unlock your handheld.
If the check box is unchecked, your device can´t be locked.
If the check box is checked, the device can be locked. In this case, press the arrow of the
Scan key and the * key within two seconds. Repeat this operation to reactivate the device.
Device Wake on Pistol Grip enables to wake up the handheld from standby as soon as the
trigger of the PowerScan pistol grip is pressed.
Check the second check box to wake up the device when the trigger of the pistol grip is
pressed.