User's Manual

Communication
Page of 34
24
4 Communication
4.1 Infrared (IrDA)
The Infrared interface is used to setup a direct connection in order to
 exchange or copy data between a PC or a mobile phone and the handheld,
 synchronize files between a PC and the handheld over ActiveSync,
 print on an Infrared compatible printer.
To setup an Infrared connection, click Start - Settings - Control Panel - PC Connection
chapter 3 - Settings Control Panel - 3.16 PC Connection - page GB-18).
Put the devices into position, so that the Infrared interfaces face each other.
When an Infrared
connection has been carried out with a PC, a message opens at the bottom of the PC and
the new icon appears on the desktop .
4.2 USB and ActiveSync
The USB client connection port is used to setup a direct connection to a USB host connec-
tion port on a PC in order to exchange data.
To setup a USB client connection with a PC, you first have to install the software ActiveSync
on the PC. Download the actual version of the software from the Microsoft/Download cen-
tre.
Installing ActiveSync
1. window appearing => Select „Next“
2. window appearing => Select „Next“ to install the software in the displayed directory.
Select „Change“ to select another directory in which the software
has to be installed and then select „Next“