User's Manual

Page 9 of 34
Removing and replacing the battery
Attach the power supply to the Honda connector.
Turn OFF the handheld by using the ON/OFF key.
Unscrew the 4 screws of the battery case and remove the battery cover (picture 1).
Remove the battery by using the notch (picture 8) and insert a new one.
Screw the battery cover back again.
Detach the power supply from the Honda connector (or leave it if the new battery is not fully
charged, notified by green LED).
2.2 Hand strap
If necessary, you can fix the hand strap (pictures 19-20-21). The hand strap is to be
fixed at the back of the handheld and can be used also in combination with the
backpack (additional device).
2.3 Starting the mobile computer
Switch ON/OFF
To switch ON/OFF the handheld, briefly and slightly press the ON/OFF key
Once the handheld has been switched ON, do not try to shut it down
within the next 20 seconds. The following window would appear (picture
22).
Caution! Depending on the settings, the handhelds automatically switch OFF the
display and keyboard backlight. BUT THE COMPUTER IS NOT SWITCHED OFF,
ALL FUNCTIONS REMAIN ACTIVE AND POWER IS STILL BEING USED. See
Settings - Power on page GB-20 to define new power settings.
The handheld has the following settings at delivery:
!
Screen + Keyboard backlight ON
Automatically Switch OFF
Battery scheme AC Power scheme
Idle Mode
Suspend Mode
tt8XXX after 5 min Never
tt8XXX after 5 min Never
To change the settings, see Settings - Control Panel - 3.17 Power - page GB-19