User Manual
Lynx L15ICE 16
Cleaning and Care Procedures
L15ICE
13) Posion and lock the ice chute onto the front and
rear frame pipes by pushing the chute down unl
it clicks onto both pipes.
14) Slide in the water tank along the rails at the
boom of the right and le brackets unl it clicks
into place.
15) Ret the sucon tube onto the water tank inlet by
pushing the joint to lock it securely in the direcon
of the arrows. A loose ng may cause a water
leak.
16) Hook each separator onto the rail, and pull it hard
toward you unl it locks in place with a click. Ret
all the separators in the same way.
17) Ret the slope in its correct posion.
18) Close the water supply line shut-o valve.
19) Discard the sanizing soluon.