SDS

Product Name: MAGNUM* 555 ABS Resin Natural
Issue Date: 08/13/2015
Page 5 of 9
10. Stability and Reactivity
Reactivity
No dangerous reaction known under conditions of normal use.
Chemical stability
Stable.
Possibility of hazardous reactions
Polymerization will not occur.
Conditions to Avoid: Avoid temperatures above 300 °C (572 °F). Exposure to elevated
temperatures can cause product to decompose.
Incompatible Materials: None known.
Hazardous decomposition products
Decomposition products depend upon temperature, air supply and the presence of other materials.
Processing may release fumes and other decomposition products. At temperatures exceeding melt
temperatures, polymer fragments can be released. Fumes can be irritating.
11. Toxicological Information
Acute Toxicity
Ingestion
Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts. May
cause choking if swallowed.
Single dose oral LD50 has not been determined.
Typical for this family of materials. Estimated. LD50, rat > 5,000 mg/kg
Aspiration hazard
Based on physical properties, not likely to be an aspiration hazard.
Dermal
No adverse effects anticipated by skin absorption.
The dermal LD50 has not been determined.
Typical for this family of materials. Estimated. LD50, rabbit > 2,000 mg/kg
Inhalation
No adverse effects are anticipated from single exposure to dust. Vapors released during thermal
processing may cause respiratory irritation.
The LC50 has not been determined. .
Eye damage/eye irritation
Solid or dust may cause irritation or corneal injury due to mechanical action. Elevated temperatures
may generate vapor levels sufficient to cause eye irritation. Effects may include discomfort and
redness.
Skin corrosion/irritation
Prolonged contact is essentially nonirritating to skin. Mechanical injury only. Under normal processing
conditions, material is heated to elevated temperatures; contact with the material may cause thermal
burns.
Sensitization
Skin
No relevant data found.
Respiratory
No relevant data found.
Repeated Dose Toxicity
Additives are encapsulated in the product and are not expected to be released under normal
processing conditions or foreseeable emergency.
Chronic Toxicity and Carcinogenicity