Manual

GB
16
Radio Doorbell Model:
BELL-510 RX
Thank you for purchasing this radio doorbell from the Bell series.
Please read the operating instructions carefully and keep them for future use.
This radio doorbell can be used on the move thanks to its built-in rechargeable
battery. The battery is charged via the integrated chargerwith the linchpin.
If a tuned-in radio doorbell transmitter is actuated, the radio doorbell plays a
ring tone and/or signals the ringing visually, depending on the setting.
In addition, the radio doorbell is equipped with a repeater module and can for-
ward received radio signals to more distant receivers of the Bell series.
Depending on the transmitter model, the range is between 100 and 500 metres
under optimal conditions. The range is inuenced byvarious factors, e.g. metal
or UPVC door frames, walls or other devices operating on the same frequency.
All transmitters in the Bell series are compatible with this radio doorbell.
Before using the radio doorbell forthe rst time, fully charge it at a 230VAC
mains socket. The control LED (3) ashes green during charging and lights up
permanently green when the battery is fully charged.
The ringing tone is set on the bell transmitter.
SCOPE OF DELIVERY
Radio doorbell BELL-510 RX
Operating and assembly instructions
BELL-510 RX
ENGLISH