Manual

GB
17
LEGEND
1 = Radio doorbell BELL-510 RX
2 = Illuminated plate
3 = Control LED
4 = Plus button
5 = Minus button
6 = Colour selection button
7 = Learning code button
8 = Flip-plug
9 = Flip-plug lock
10 = Function selector switch
11 = ON/OFF switch
COMMISSIONING
Switch on the radio doorbell with the ON/OFF switch (11).
On
O
NOTE: If the radio doorbell is not in a socket, the control LED does not light up in
standby. See also the section "Control LED".
CHARGING FUNCTION + FLIP-PLUG
Press the lynch pin lock down to unfold the lynch pin and plug the radio doorbell
into a mains socket. The charging process begins and the control LED ashes
green.The radio doorbell does not have to be switched on for this. If the control
LED lights up green continuously, the charging process is complete.
To be able to use the receiver on the move, push the linchpin back until it snaps
back into place underthe linchpin lock.
BELL-510 RX
ENGLISH