User manual

ENGLISH
VYSYS XDC-20
ADDITIONAL WIRELESS DOME CAMERA
15
Installation and Commissioning
INSTALLATION
The camera has 2 fixing holes on the lower ring.
Find a suitable location for installing the camera.
1
Use the camera as a template to mark the
drill holes. When drilling the holes, use a
drill bit suitable for the size of the wall
plugs. The supplied wall plugs require a
6 mm drill bit.
2
The cables should be laid in such a
way that they are protected against
manipulation, for example, in a cable
duct. In addition, the camera connections
must be installed in a protected position
so that no moisture can enter the plug-in
contacts. Use a waterproof junction box,
if necessary.
3
Then align the camera and fix it with the
two cross screws on the housing.
CONNECTION
•
The camera has a connecting cable with two
plug connectors on the end.
• The RJ45 connector can be used to configure the
camera via Ethernet cable and make it available
to the system.
• The round socket is used to connect the camera to
the external power supply (DC voltage, 12V/DC).
NOTE !
The camera will be damaged if the connection or
voltages are incorrect!
Loss of warranty/guarantee!
• A suitable round connector is required
for connection:
External diameter 5.5 mm,
internal diameter 2.1 mm.
The external contact of the round connector
must have Minus/-, the inner contact Plus/+.
A suitable mains adapter is enclosed, + and -
are labelled correspondingly.