Operation Manual

Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse
aid residues left as a result of overflowing will create extremely high amounts of foam and thus
reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.
If you properly place your dishes into the machine, you will be using it in the best way in terms
of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can load into
the lower basket such round and deep items as pots with long handles, pot lids, plates, salad
plates, cutlery sets.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and
glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack
or glass supporter wire and not against other items. Do not lean long glasses against one
another or they cannot remain steady and may receive damage.
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.
You can place spoons among the other cutlery sets in order to prevent them from sticking to
one another. You are recommended to use the cutlery grid in order to obtain the best result.
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as
serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper and
lower spray arms from spinning.
Dish rack
There are dish racks on the upper basket of
your machine. a b You can use these dish
racks in open or closed position. When they are
in open position a you can place your cups on
them; and when in closed position b you can
place long glasses on the basket. Also, you can
use these racks by placing long forks, knives
and spoons on them laterally.
LOADI
NG YOUR DI
SHW
ASHER
15
Bovenste serviesrek, hoogte-instelling
Het bovenste rek bevindt zich in de hoogste stand. In deze stand kunt u grote voorwerpen (pannen,
enz.) in het onderste rek plaatsen. Als het bovenste rek in de onderste stand staat, kunnen daarin
grote borden worden afgewassen.
Gebruik de wieltjes om de hoogte van het rek aan te passen. Open de beveiligingsdelen van het rek
aan het eind van de rails door de delen naar de zijkant open te draaien en haal het rek eruit. Verplaats
de wielen, duw het rek weer in de rails en sluit de beveiligingsdelen. Nu heeft u het bovenste rek in de
onderste stand geplaatst.