Operation Manual

Control panel
5
A B
4
132
1 On/Off button
2 Delay start button
3 Programme selection / Cancel button
4 Indicator lights
5 Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme, these lights
will also guide you in the following operations:
– setting the water softener level,
– deactivating/activating the audible signals.
Indicator lights
End Comes on when a washing programme has ended. It also has added func-
tions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the appliance.
Rinse aid Comes on when the rinse aid has run out.
Salt Comes on when the special salt has run out.
Setting mode
Press the On/Off button; if ALL programme
indicator lights are off and the End indicator
light is flashing, the appliance is in setting
mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme in-
dicator light is on with a fixed light, the last
performed or selected programme is still set.
47