Owner's Manual

29
Owner’s Manual
Owner’s Manual
Appendix C: Technical Information
Specifications
Noise
20 Hz – 20 kHz, 150 Source Impedance
Equivalent Input Noise
(Mic in to Insert Send out, max gain) –125 dBu
Residual Output Noise
(All outputs, master levels off, all channel levels off)
–95 dBu
(All outputs, master levels unity, all channel levels off)
–80 dBu
(All outputs, master levels unity, one channel level unity)
–80 dBu
Distortion
20 Hz – 20 kHz
THD+N, SMPTE IMD
(Mic input to Main output) <0.03% @ +4 dBu output
Common Mode Rejection Ratio
1 kHz
(Mic input to Insert Send output) 60 dB gain at unity
Frequency Response
20 Hz – 30 kHz
(Mic input to any output, gain at unity) +0 dB / –1 dB
Crosstalk
20 Hz – 20 kHz
Adjacent Inputs –90 dB @ 1 kHz
Inputs to Outputs –90 dB @ 1 kHz
Fader Off –75 dB @ 1 kHz
Mute Switch/Break Switch Mute –90 dB @ 1 kHz
Maximum Levels
All Inputs +22 dBu
Main Mix XLR +28 dBu
All other outputs +22 dBu
Impedances
Mic in 3 k
Channel Insert return 10 k
Ch 1 Instrument Input 1 M
All other inputs 20 k
Tape out 1.1 k
Phones out 25
All other outputs 120
Maximum Voltage Gain (EQ Flat)
Mic Input Channel to
Insert Output 50 dB
Tape Output 60 dB
USB Output 50 dB
1/4 Inch Main Output 70 dB
XLR Main Output 76 dB
Monitor Send 75 dB
FX Send 90 dB
Mono Line Input Channel to
Insert Output 30 dB
Tape Output 40 dB
USB Output 30 dB
XLR Main Output 56 dB
Monitor Send 55 dB
FX Send 70 dB
Stereo Line Input Channel to
Tape Output 30 dB
USB Output 20 dB
XLR Main Output 46 dB
Monitor Send 45 dB
FX Send 60 dB
Tape Input to
Tape Output 20 dB
USB Output 10 dB
XLR Main Output 36 dB
USB Input to
Tape Output 20 dB
USB Output 10 dB
XLR Main Output 36 dB
Stereo Return to
Tape Output 10 dB
USB Output 0 dB
XLR Main Output 26 dB
Effects Return to
Tape Output 10 dB
USB Output 0 dB
XLR Main Output 26 dB
Monitor Send 25 dB
Channel EQ
Low Cut 100 Hz, –18 dB/Octave
High Shelving ±15 dB @ 12 kHz
Mid Peaking ±15 dB @ 2.5 kHz
Low Shelving ±15 dB @ 80 Hz
Digital Effects
I/O Mono Input / Stereo Output
Number of Presets 16