User Manual

Owner’s Manual
15
Owner’s Manual
Thump12 / Thump15 Loudspeakers Specifications
Appendix C: Technical Information
Line Input Power
US: 100 – 120 VAC,
50 – 60 Hz 130 watts
EU: 220 – 240 VAC,
50 – 60 Hz 130 watts
AC Connector: 3-pin IEC 250 VAC,
10 A male
Safety Features
Peak and RMS limiting, power supply and amplifier thermal
protection
Construction Features
Basic Design: Trapezoidal
Material: Polypropylene
Finish: Textured
Handles: One on each side, one on top
Grille: Perforated metal with
weather-resistant coating
Display LEDs
Front: Power ON
Rear: Power ON, OL (overload)
Operating Temperature: 0 – 40 ˚C
32 – 104 ˚F
Physical Properties
Thump12:
Height: 23.5 in / 596 mm
Width: 14.5 in / 367 mm
Depth: 12.4 in / 314 mm
Weight: 29.0 lb / 13.2 kg
Thump15:
Height: 27.6 in / 702 mm
Width: 16.8 in / 427 mm
Depth: 15.5 in / 394 mm
Weight: 33.2 lb / 15.1 kg
Mounting Methods:
Pole-mountable via the built-in socket on the bottom of the
cabinet. Be sure the pole is capable of supporting the weight
of the Thump loudspeaker.
Options
Thump12 Bag P/N 2036809-07
Thump15 Bag P/N 2036809-06
SPM200 Loudspeaker Pole Mount P/N 2035170-01
Acoustic Performance
Frequency Range (–10 dB): 50 Hz – 23 kHz [Thump12]
32 Hz – 23 kHz [Thump15]
Frequency Range (–3 dB): 57 Hz – 20 kHz [Thump12]
39 Hz – 20 kHz [Thump15]
Horizontal Coverage Angle: 90º
Vertical Coverage Angle: 60º
Maximum SPL Peak: 125 dB SPL @ 1m [Thump12]
126 dB SPL @ 1m [Thump15]
Monitor Angle 50˚ [Thump12]
45˚ [Thump15]
Transducers
Low Frequency: 12 in / 305 mm [Thump12]
15 in / 381 mm [Thump15]
with steel frame, paper cone woofer
High Frequency: 1.4 in / 36 mm Titanium dome
compression driver
Power Amplifiers
Low Frequency Power Amplifier
Rated Power: 400 watts rms
800 watts peak
Design: Class D
High Frequency Power Amplifier
Rated Power: 100 watts rms
200 watts peak
Design: Class AB
Input/Output
Input Type: Female XLR / 1/4" Balanced
Input Impedance: 20 k
balanced bridging;
10 k
unbalanced
Thru: Male XLR Balanced
Level Control: Rotating knob
0 dB at center
Sensitivity: +4 dBu for full output
(Level Control @ Center)
–36 dBu for full output
(Level Control @ Max)
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Equalization
Low Frequency EQ: ±6 dB @ 80 Hz, shelving
Mid Frequency EQ: ±6 dB sweepable from
100 Hz to 8 kHz
High Frequency EQ: ±6 dB @ 12 kHz, shelving