User guide

Declaration of Conformity

Mvisto has successfully passed the EN 55022 (Emissions Environment) and EN 55024 (Immunity

Environment) EMI test procedures. Subsequently, this product is fully CE compliant and assigned

with the CE mark.

Moreover, Mvisto is a Class B digital apparatus that meets all requirements of the Canadian

Interference Causing Equipment Regulations.

This device complies with part 15 of the FCC rules. Operation is subject to the following

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received including any interference that may cause undesired operation

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

The socket – outlet shall be installed near the equipment and

shall be easily accessible. In case of emergency, it is

necessary to be able to disconnect the device immediately from

the electrical network by disconnecting the device power cable

either from the outlet or from the device inlet.

Other devices connected to Mvisto should be compliant with

safety regulations and should be SELV (safety extra low

voltages) devices or circuits in order for Mvisto to fulfill the safety

requirements.

The information contained in this manual is believed to be accurate and reliable. Macpower&Tytech Technology assumes no responsibility

for any errors contained in this manual. Macpower&Tytech Technology reserves the right to make changes in the specifications and/or

design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product

that you are using and are there for illustration purposes only. Macpower&Tytech Technology assumes no responsibility for any differences

between the product mentioned in this manual and the product you may have.

■