User guide

How to Safely remove Mvisto from the

Computer

In order to safely remove your Mvisto from your

system, please follow the same procedures as for

any Plug & Play external USB device, specifically:

Double click on the taskbar icon to “Unplug or Eject

hardware”. The adjacent dialogue box will appear,

displaying the Plug & Play external devices. In the

current example, you can see Mvisto as a USB

Mass Storage Device.

In order to remove it, click the device in the list and

then click Stop.

Click OK on the next dialogue box. The operating

system will automatically stop the device and inform

you for its safe removal. If you are using Mvisto (e.g.

you are working on a Word document or a picture

located in its disk), the operating system will notify

you that it is unable to remove the device. In this

case, close all the applications affecting or

accessing Mvisto and try again.

TV Connection

Mvisto provides high quality video and audio output when connected to your TV set and audio

system.

The TV connection is straight forward. Just connect Mvisto to your TV set (NTSC or PAL)

using the AV cable supplied, plug the Power Supply adaptor into the Mvisto, and then into the

electrical outlet. Now make sure the switch on the back of the unit is turned on.

Audio Setup

Audio is provided to the stereo input of your TV set by the Left/Right RCA jacks.

■