Operation Manual

- 5 -

Detect parking brake

• Connect the cable "BRAKE" to the parking brake switch to view video files on the TFT monitor.

Engage the parking brake for viewing videos.

• When the parking brake is not engaged, the monitor displays "Warning!!!, Video playback is

disabled for your safety. Engage parking brake to watch video.", preventing the driver to watch

content while driving. The rear screens are not interested in this inhibition.

Power On / Off

Press the [ ] button on the front panel to turn the unit ON. The buttons on the front panel light up

and the current mode status appears on LCD.

Press and hold the button to turn OFF the unit.

Volume Adjustment

To increase or decrease the volume level, press the [ ] or [ ] button on the front panel. The

volume range is from “0” to “40”. The TFT screen displays the volume level for 3 seconds.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the

Setup menu.

Playing Source Selection

Press the [ ] button on the front panel to display the playing source menu.

1. Touch [

] oppure [ ]to view the previous or next page of playing sources.

2. Playing source icon: touch to access corresponding work mode.

3. Time status.

4. Bluetooth status.

5. Date.

Basic Operations