Operation Manual

- 18 -
Auxiliary inputs
Aux 1
Aux 1 is used for playback of audio/video from an external device connected to the unit through a
3.5mm jack located on the front panel.
Aux 2
Aux 2 is used for playback of audio/video from an external device connected through RCA
connectors located on the back of the unit.
You can connect an external audio/video device to the unit.
1. Connect the external device with the supplied AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [Aux 1] / [Aux 2] to access external device.
NOTES:
1. Audio/Video device must be connected to the unit using an audio/video adapter cable that is
available separately.
2. Video will only play when the vehicle parking brake is engaged. The parking brake must be
connected for this feature to operate.
Reset
When the unit hangs up, you can reset it.
Press [ RESET ] with a ball-point pen or similar tool.
Tip:
When the unit has been reset, all the settings will return
to default settings.
Replace a Fuse
If there is no power, the fuse may be damaged and need to be replaced.
1. Take out the unit from dashbpard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage of the damaged fuse.
4. Replace the fuse while the units power is disconnected.
Other Modes
Reset