User`s manual

Assigning TCP/IP Values Manually

If you already have a DHCP server on the network, or if you prefer

not using the XRouter Pro’s DHCP server to assign TCP/IP values

automatically, you can input these values manually.

To enter values for the managing computer’s address manually:

1. Click the IP Address tab from the TCP/IP properties window.

2. In the IP

Address field enter “192.168.1.x” where x is any

variable of your choice ranging from 2 - 252. Enter

255.255.255.0 in the Subnet Mask field.

(NOTE: No two computers on the same LAN can have the

same IP address or an IP address conflict will occur.)

3. Click the DNS tab and enter the DNS IP addresses provided

by your ISP in the DNS

fields.

4. Click the Gateway tab and enter a value in the Gateway IP

address field. The Gateway IP address value must be the

same as the XRouter Pro's IP address; (the XRouter Pro’s

default IP address is 192.168.1.1).

5. After specifying the settings of TCP/IP click OK and restart

Windows to allow the settings to take effect.

Easy Installation