User`s manual

Mac OS TCP/IP Configuration

1. Open the TCP/IP control panel.

2. In the Connect via menu select the Ethernet interface that is

installed on your computer.

3. In the Configure pull-down menu that appears, select Using

DHCP Server to allow the built-in DHCP server of the XRouter

Pro to assign an IP address and other TCP/IP configuration

information to the client automatically. Do this for each client

that needs Internet access through the XRouter Pro.

(Note: The DHCP Client ID field is not require to connect to

the XRouter Pro. It is normally used to identify computers in a

DHCP network. If you desire to input the name of computer in

this field, you may. )

4. Close the TCP/IP window and save the changes.

Easy Installation