User`s manual

Assigning TCP/IP Values Manually

If you already have a DHCP server on the network, or if you prefer

not using the XRouter Pro’s DHCP server to assign TCP/IP values

automatically, you can input these values manually.

To enter values for the managing computer’s address manually:

1. In the Connect via menu select the Ethernet interface that is

installed on your computer.

2. In the Configure menu select Manually.

a. In the IP

Address field, enter “192.168.1.x” where x is any

variable of your choice ranging from 2 - 252.

(NOTE: No two computers on the same LAN can have the

same IP address or an IP address conflict will occur.)

b. In the Subnet Mask

field enter 255.255.255.0.

c. In the Router

Address field enter 192.168.1.1, the XRouter

Pro’s default address.

d. In the Name Server

Address field enter the DNS information

provided by your ISP. In the Search Domains

field enter the

domain information provided by your ISP.

e. Close the TCP/IP window and save the changes.

Easy Installation