User`s manual

TROUBLESHOOTING

This chapter provides solutions to problems that may occur during

installation and operation of the XRouter Pro MIH-130.

1. The Link LED is off.

• Check that all connectors are firmly plugged-in.

• Check the power adapter making sure it is plugged into an

electrical outlet.

2. Can't connect to MIH-130 XRouter Pro via Web browser.

• Verify that the IP address 192.168.1.1 has been correctly

entered in the URL field.

• Check the network cable connection and LAN LED indicator

on the XRouter Pro.

• Check out the TCP/IP setup on your client. Type "winipcfg"

on DOS prompt under Windows 95 or open the TCP/IP con-

trol panel on the Mac OS platform. The client should get an

IP address of 192.168.1.x (where "x" is from 1 to 252.)

4. Can't connect to MIH-130 XRouter Pro to the Internet.

• Check whether your ISP requires the use of the MAC

address of your router. Some ISPs require the MAC address

of the device your connecting to your their network. If this the

case, you will need to contact your provider and supplied them

with the correct MAC address of the router.

• If you are using a Static IP address that your ISP supplied,

verify that the IP address is correct and has been correctly

entered in the URL field.

• Check your cable between the all devices.