User`s manual

Rear Panel Description

LAN Ethernet Ports - Four 10/100BASE-T Ethernet network (RJ-

45) ports used for linking hub/computer in a Local Area Network to the

XRouter Pro.

WAN Ethernet Port - One Wide Area Network port for connecting

the XRouter Pro to the Internet via a cable or DSL modem.

Reset Button - Used for resetting the XRouter Pro’s IP Address

information and user password to the factory default settings.

5VDC Power Adapter Receptacle - Plug the power adapter cable

into this port to supply power to the XRouter Pro unit.

Uplink Switch - Used to determine the configuration of the

XRouter Pro’s LAN port No. 4. Choose either parallel (normal) for con-

necting LAN computers to the XRouter Pro or crossover mode (uplink)

for daisy-chaining a series of hubs to the XRouter Pro.

Appendix B

LAN

WAN

Reset