User's Manual

Appendix B Pin Assignment
RJ-45 connector
The RJ-45 connector is used to connect with a hub or switch, RJ-45 regular ports can
be attached to any devices which use a standard network interface (e.g., a workstation,
server, bridge or router). RJ-45 up-link ports can be cascaded to a station port on similar
networking devices (e.g., another switch or hub). Use unshielded twisted-pair (UTP) or
shielded twisted-pair (STP) cable for RJ-45 connections: 100½ Category 3, 4 or 5 cable for
10 Mbps connections or 100½ Category 5 cable for 100 Mbps connections. Also be sure
that the length of any twisted-pair connection does not exceed 100 meters (328 feet).
Schematics for straight cable are shown as below.
Assignment
11