Brochure

Manufactured by Aerionics, Inc. Sioux Falls, SD - Phone: [phone] - Email: [e-mail] - www.macurco.com
Macurco offers calibration and test kits, calibration gas, service, parts and accessories for the Macurco Security Series,
6-Series, 12-Series, Portable Single-Gas Series and IT Series products. For a full list of accessories, specifications and
instructions please visit our website at www.macurco.com.
DMK-1 Duct Mount Kit
The Macurco DMK-1 is an air tight enclosure that provides a means to mount
any Macurco 6-Series or 12-Series gas detectors to an air duct. By duct
mounting a Macurco gas detector it is able to monitor the air inside of the duct
and provide early detection of various gases moving through the HVAC system.
The DMK-1 used with Macurco gas detectors can provide automatic control to
prevent recirculation of these gases into additional areas by the air handling
systems in commercial and residential applications - UL outdoor exposure listed,
flame retardant, UV stabilized polycarbonate housing, clear cover.
WHK-1 Weatherproof Housing Kit
The Macurco WHK-1 is a weatherproof enclosure that provides a means to
protection-mount any Macurco 6-Series or 12-Series gas detectors in locations
exposed to problematic environments. By weatherproofing a gas detector, the
unit is able to monitor ambient gas concentrations while being protected from
falling debris and indirect water spray. The Macurco WHK-1 is designed with
sufficient airflow through multiple vent plugs for effective gas detection. The
polycarbonate housing is flame retardant, UV stabilized and UL outdoor exposure
listed. A clear cover allows users to view the detector, display and status lights.
Calibration and Test Kits
All Macurco gas detectors are factory calibrated. Each detector’s performance
should be tested regularly by using gas as detailed in the field testing and field
calibration sections of the user instructions. Macurco offers gas calibration and
test kits with certified gas of a concentration and content listed for the detector
when conducting a calibration or calibration verification test (bump test).
Calibration kits include gas cylinders, gas regulator, plastic tubing, humidifier,
calibration hood and a deluxe Macurco carrying case.
CME1-FTG Field Test Gas
The CME1-FTG is an 11 liter 500ppm aerosol carbon monoxide field test gas
that can be used with the Macurco carbon monoxide detectors. This field test
gas allows users to do a quick functionality test of the CO sensor. The flow rate
of the CME1-FTG is 10 liters per minute so there is about a minute of gas or
enough to test 20-30 units. With the cover in place, the gas is injected directly
into the housing by placing the nozzle of the aerosol can onto the sensor grate
area and pressing the trigger for 2 to 3 seconds.
GAS DETECTION
Macurco Parts and Accessories