Instructions / Assembly

Important safety instructions：
• Please read carefully all instructions before assembly.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Take out all parts and hardware from box.
Parts List
Item QTY
P1
Storage Bench
1
P2
Legs
4
Hardware List
Item QTY
H1 Plastic Washers
8
DISCLAIMER:
Assembly Procedures:
ASSEMBLY INSTRUCTIONS
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
Description
Description
Step 1.Take out legs and plastic washers as illustration below.
Step 2.Turn the bench(P1) upside down and lay on protective carpet, insert plastic washer(H1) on legs(P2), and attached
legs(P2) on bench(P1), Screw tight to the right angle.
Step 3. Place bench upright on a level surface.Assembly is complete.
Thank you for your purchase
Page 1 of 1
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY
DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD
BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO
ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED.
P1
Remove the plastic
caps from screw heads
before attaching legs
.
P2
H1
Description: Shandra II Storage Bench