Operation Manual

33
Default System Settings
Restoring All Default System Settings
It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800
km/500 mi with the Magellan RoadMate receiver turned off. Setting the GPS position will allow the Magellan
RoadMate receiver to compute which satellites are available and calculate the position more quickly.
1. From the Main Menu screen, tap the Settings icon.
2. Tap GPS Options.
3. Tap Set GPS Position.
Enter an address as you were selecting a destination.
Viewing Product Information
1. From the Main Menu screen, tap the Settings icon.
2. Tap Product Information.
(Note: Scroll down the page to view the Serial Number and Software Version.)
Speed Warnings (Magellan RoadMate 2120)
The Magellan RoadMate can provide you with audible and/or visual warnings when you exceed the speed limit
by a threshold you set.
Accessing Speed Warning Settings
1. From the Map screen tap Menu.
2. Tap the Settings icon.
3. Tap Speed Warning.
Choosing the Type of Warning
1. From the Map screen tap Menu.
2. Tap the Settings icon.
3. Tap Speed Warning.
4. Set the Audible Warning and Visible Warning check boxes to the desired state. (Checked is the warning
is on, unchecked and it is off.)
Selecting the Speed Limit Sign
1. From the Map screen tap Menu.
2. Tap the Settings icon.
3. Tap Speed Warning.
4. Set the Visible check box to the desired state. (When checked, the speed limit sign icon will be displayed
on the Map screen.)
Setting the Speed Threshold
1. From the Map screen tap Menu.
2. Tap the Settings icon.
3. Tap Speed Warning.
Use the Highways and Other Roads slider bar to set the threshold that you want to be alerted when exceeding
the posted speed limit.