User guide

Installation
MultiView™ II DVI-Tx Installation and User Guide 9
To install a MultiView-II DVI-Tx transmitter:
1. Connect the source video to the Magenta MultiView™ DVI-Tx transmitter’s video input port, which is a
DVI-D connector labeled DVI-IN.
2. If desired, attach a local monitor to the DVI-D connector labeled LOCAL OUT (if available).
3. Make your audio or serial connections via the AUX-I/O (Phoenix) connector or DB9 connector as
appropriate.
4. Connect the twisted-pair cable to the transmitter.
5. Apply power to the transmitter.
a. The power-on LED should light up.
b. If there is a local monitor attached, a video image should appear on the
monitor.