User guide

Mounting Kits
MultiView™ II DVI-Tx Installation and User Guide 26
Appendix D Mounting Kits
There are several kits available for mounting the DVI-TX:
Mounting Kit #
Description
2211053-01
Rigid-mount bracket.
This mounts a single device to a surface
(wall/desk/etc.).
Comes with 4 self-tapping screws.
8310207-01
1U Rack-mount Plate for standard 19” rack.
Mounts 4 devices in a 1U space.
Comes with (8) device-mounting screws, (4) rack-mounting screws.
8310208-01
2U Rack-mount Plate for standard 19” rack.
Mounts 8 devices in a 2U space.
Comes with (16) device-mounting screws, (4) rack-mounting screws.
Note: When installing DVI-TX devices in an area susceptible to elevated operating temperatures (near the
maximum specified operating temperature), it is important to give careful consideration to maintaining adequate
air flow. Within a rack assembly, cable bundles and other equipment in the same rack can impede proper
cooling. In some rack-mount applications you may even need to leave a 1U gap (using a blank filler plate)
between DVI-TX groups. For surface-mount applications, ensure the device will have adequate air circulation
and that air-vents on the enclosure are not blocked.
DVI-TX with Rigid-mount Bracket:
DVI-TX with 1U Rack-mount Plate:
DVI-TX with 2U Rack-mount Plate: