Installation guide

iNSTALLATiON iNSTRUCTiONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
D"_conneCt electrical power at the fuSeboxor c!rcult-q
breaker b0x bef0re insta!!!ng dishwasher.
Yes'FollOw instructi0ns in the "PrePare cab!net
Opening_Existing utilities!! section_
NO'Follow instructions in the "Prepare Cabinet
Opening_New uti!ities'! secti0nl
_: E :isting hookups g t ity hookups
Water line
Prepare Cabinet OpeningmExisfing
Utilities
if the water line and the cable extend to the locations shown,
proceed to the "install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening--
New Utilities" section.
Prepare Cabinet OpeningmNew
Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
Direct Wire:
, _ _ Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
Power Supply Cord-Drill hole
OptiSnal location
i ;
Drill a 11/2"(3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.