Installation Instructions

Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., CST,
Monday - Friday or e-mail: [e-mail].
Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x2) wall anchors - if the cabinet will not be screwed to wall
studs (B)
Estimated installation time: 1/2 hour
PREPARATION
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precautionary
measures to ensure a secure grip on the cabinet when lifting.
CAUTION:
The bathroom wall must be nished prior to installation of the
cabinet.
PACKAGE CONTENTS
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing the
cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet
immediately with a clean, soft and dry cloth.
White model: 30240
24”W x 30”H x 6-13/16”D
Gray model: 30248
24”W x 30”H x 6-13/16”D
B
INSTALLATION
1: Using a level, locate any uneven wall
areas where the cabinet will be installed.
Unevenness can cause the cabinet to
become misaligned resulting in twisting
of the cabinet. Repair any uneven areas.
2: Determine the desired location of the
cabinet. NOTE: It is recommended that the
cabinet be installed to at least 1 wall stud.
In order to locate wall studs, you can use
a stud nder or tap along the wall until you
nd a spot that sounds solid. If you are
unable to locate a wall stud, it is recommended
that you use wall anchors (B - not included) to
secure your cabinet.
3: Secure the cabinet to the wall by inserting
(x4) 2” screws with (x4) washers through the
backrails of the cabinet and into the wall. Figure 1.
2” screws (x4)
Washers (x4)
GENEVA TOILET TOPPER
INSTALLATION INSTRUCTIONS
White model: 30240
Gray model: 30248
Cabinet (x1)
Figure 1 Figure 2: installed
A
A