Installation Instructions

ManualsBrandsMagick Woods ManualsBath13" Concord Collection Linen Tower

Thank you for selecting our product. To ensure that your installation goes smoothly, please read these instructions

carefully before you begin. Also review the recommended materials and tools for a smooth installation. Before

you start, verify that you have all the mentioned components for your model shown below and ensure that all

are free from defects. If any part is missing or damaged, contact Customer Service for replacement parts.

Questions, problems, missing parts? Before returning to your retailer, call our Customer Service department

at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday. ContactUs@magickwoods.com

CONCORD ACCESSORIES

LINEN CABINET

SPACE SAVER CABINET

WALL CABINET

INSTALLATION INSTRUCTIONS FOR:

PRODUCT:

14 in. CONCORD WALL CABINET

DIMENSIONS:

14 in. W x 7-7/8 in. D x 17-1/4 in. H

MODEL:

FM.MC100

2 in. screw (2x)

Wall

cabinet

(1x)

Knob (1x)

1 in. screw (1x)

PRODUCT:

13 in. CONCORD LINEN CABINET

DIMENSIONS:

13 in. W x 10-3/8 in. D x 47-1/8 in. H

MODEL:

FM.PA101

Linen cabinet

(1x)

1 in. screw (8x)

Knob (2x)

1 in. screw (1x)

1-1/4 in. screw (1x)

Foot (4x)

PRODUCT:

26 in. CONCORD SPACE

SAVER CABINET

DIMENSIONS:

26 in. W x 9-3/8 in. D x 68-15/16 in. H

MODEL:

FM.TT200

Cabinet unit (1x)

Leg unit

(1x)

Knob (2x)

1 in. screw (2x)

5/8 in. screw (12x)

2 in. screw (4x)

Washer

(4x)

Tools Required for Assembly (not included):

• Tape Measure • Straight Edge or Leveling Meter

• Electric Drill with #2 Drill Bit (A) • (2) #8 x 2 in. Screws -

for linen

• (2) Wall Anchors* - if the cabinet cabinet only (B)

will not be screwed to wall

studs (C)

*Wall anchor type dependent on wall material and local building code (if building code applicable).

Estimated Installation Time: 1/2 hour

PREPARATION

B C

Summary of content (4 pages)

PAGE 1
CONCORD ACCESSORIES LINEN CABINET . SPACE SAVER CABINET . WALL CABINET Thank you for selecting our product. To ensure that your installation goes smoothly, please read these instructions carefully before you begin. Also review the recommended materials and tools for a smooth installation. Before you start, verify that you have all the mentioned components for your model shown below and ensure that all are free from defects. If any part is missing or damaged, contact Customer Service for replacement parts.
PAGE 2
WARNINGS & CAUTIONS FOR ALL ACCESSORIES WARNING: Two people are required for safe installation. Take extra precautionary measures to ensure a secure grip on the cabinet when lifting. CAUTION: • To maintain the beauty of the cabinet finish, avoid placing the cabinet in direct sunlight. • Avoid exposing the cabinet to extreme temperatures by installing away from heat and air vents. • The bathroom wall and/or floor must be finished prior to installation of the cabinet.
PAGE 3
INSTALLATION FOR SPACE SAVER CABINET Step 1: Attach the knobs by using the 1 in. screws provided. Figure 4. Step 2: 1) Place the cabinet unit on top of the leg unit, aligning the cabinet unit edges and leg unit edges on all sides. 2) Ensure the L-bracket holes on the leg unit and the predrilled holes in the bottom of the cabinet unit are all aligned. 3) Secure the cabinet unit to the leg unit by inserting the (12x) 5/8 in.
PAGE 4
Step 3: 1) Mark the location of the mounting screws on the wall, ensuring that they are level. 2) Insert wall anchors (C), if applicable. 3) Insert the (2x) 2 in. screws provided. Figure 9. Step 4: Hang the cabinet on the wall, using the hanging hardware provided. Figure 10. Hanging hardware A C A Figure 9 Figure 10 Figure 11: complete TROUBLESHOOTING FOR ALL ACCESSORIES Problem Possible Cause Corrective Action : Wall cabinet is higher on one side than the other.