PCIe Expansion System User's Manual

MAGMA
30
System Should Be Up and Running
As noted previously, apply power to the Magma expansion chassis first,
then power up the computer.
Use the procedures detailed in
Chapter 3 to confirm proper card
installation(s). When everything is functioning correctly, your Windows
Device Manager should look something like this for any given slot:
If you discover that any of your 3
rd
Party PCIe cards contains a
(exclamation mark) you have a problem with that card.
Refer to
Chapter 5 Troubleshooting for further guidance.
Finishing Touches
Once your system is working properly, replace the host computer and
the expansion chassis covers.
Last, if you previously installed the rack-mounting brackets, simply slide
and secure the chassis in its place within the rack cabinet.
It is advisable for the chassis to be turned off while docking it into the
rack cabinet. If it cannot be turned off, pay special attention to the iPass
and power cable management prior to plugging them into the chassis.