Specifications
SECTION 6
ADVANCED USER INFORMATION
6.1 GENERAL: Although the SW-1000-SC is designed so that minimal
manual adjustments are necessary, custom user adjustments are available. These
adjustments allow the user to dene sensitivities of the VOX and squelch systems,
adjust listening volumes, and change channels. Because no standards for design of
full-face masks have been established, virtually all full-face masks have different
internal designs. Some designs have little room for microphone installation, thereby
requiring a more sensitive setting. These advanced adjustments offer the user more
options.
When VOX is selected, your transceiver will give you a setting that is either the
factory preset or the custom user setting. If you nd that you need more or less
sensitivity, you can easily change the settings.
The adjustment controls are located on the inside bottom of the upper electronics
module. The controls include level controls (VOX, side audio volume, etc.) and a
slide switch for changing channels (Fig. 6).
6.2 VOX: The VOX sensitivity control is labeled “VOX” on the bottom of
18
Figure 6
Key
(1) O-ring groove (5) Receive volume adjustment
(2) VOX adjustment (6) Belt clip
(3) Intercom volume selection (7) Squelch adjustment
(4) Channel selection (8) Sidetone volume adjustment