Specifications

SECTION 2

EQUIPMENT DESCRIPTION

2.1 GENERAL DESCRIPTION

The Magnacom

SW-1000-SC is housed in a watertight enclosure designed for easy belt

or tank mounting. (For surface operation, our Magnacom

MAG-1001S surface station

and SW-100-CD portable surface unit are fully compatible with the SW-1000-SC and

offer long-range performance. Note: Be sure to obtain a MAG-1001S or SW-100-CD

programmed for the same channels as the SW-1000-SC.)

2.2 PACKAGE DESIGN

The SW-1000-SC housing is constructed of high-impact, glass-reinforced ABS plastic,

which will not corrode if scratched.The housing is divided into two major parts (Fig. 2):

the upper electronics and lower battery sections. An o-ring between the sections sustains

the housing’s watertight integrity. Stainless steel latches maintain a constant pressure

that pre-loads the o-ring and prevents leakage within specied depths. (Note: Upper and

lower housings are a matched set; do not mix them up with those of other transceivers.)

Key

(1) High-powered transducer

(2) Water switch (1 of 2)

(3) Red LED

(4) Strike

(5) Latch

(6) Battery housing

(7) RB-14 battery (p/n 910272-000)

(8) Large o-ring (p/n 283002-000)

(9) Spring battery contacts

(10) Upper electronics module

(11) To ear-mic and charging connection

(12) Diver-to-diver communication

Figure 2