Owner's manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 6. Once a final position has been chosen for the new
exhaust system, evenly tighten all clamps from front to rear
using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary. the Muffler
assemblies using the provided 2.50" clamps.
Step 5. Now you can attached the Tip assembly to the
Muffler assemblies using the provided 2.50" clamps.