User guide

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 7. Once a final position has been chosen for the new
exhaust system, evenly tighten all clamps from front to rear
using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.
Step 6. Next install the Tail Pipe Assembly using the
supplied 4.00" clamp and fit the welded hanger to the rubber
insulator.