User Manual

- 18 -
ADJUSTING LED BRIGHTNESS
You can adjust the brightness of the LED display making it brighter, dimmer or even
turning it OFF when the radio is OFF. There are four dimming options available: HIGH/
MEDIUM/LOW/OFF Standby. Press the DIMMER button to toggle between the four
brightness settings.
LISTENING TO THE RADIO
1. Press the button on the front panel to turn the radio 'ON'.
2. Press and hold the AM / FM button to toggle between AM and FM radio bands.
3. Press the / buttons once, to move back/move forward one station at a
time.
4. Press and hold the / buttons for one second to scan back/forward through
the stations; the unit will automatically scan to the next broadcasting station.
5. Press the button on the front panel to turn the radio 'OFF'.
Please ensure that the FM antenna is completely unrolled and extended for best FM reception. The
AM band uses an internal directional aerial. For best reception, please rotate the radio.
TO SET / RECALL THE RADIO PRESETS
1. Press the button on the front panel to turn the radio 'ON'.
2. Press and hold the AM / FM button to toggle between AM and FM radio bands.
3. Use the / buttons to select the desired radio station.
4. Press and hold the PRESETS button; 'P02' will blink in the display.
5. Use the / buttons to toggle to the desired preset 'P01-P10' number.
6. Press the PRESETS button again to set the preset.
7. Repeat steps 2 through 4 to set more presets.
8. To select a preset station, press the PRESETS button until desired preset station
appears on the LED panel.
The unit supports up to 10 AM & 10 FM preset stations.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS