User Manual
- 20 -
Please consult the Troubleshooting chart below before communicating with
Magnasonic Customer Support.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
GENERAL
Power does not come on AC cord not plugged in Insert plug rmly into AC outlet
RADIO
No Sound Power is not on
Press the button
VOLUME control at minimum
position
Turn the VOLUME control up
1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Clean only with a dry cloth.
TROUBLESHOOTING
CARE AND MAINTENANCE
SPECIFICATIONS
Noise or sound distorted
on AM or FM
AM-interference from trac Tune the radio for better AM reception
FM-antenna wire not extended Extend antenna wire
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
CLOCK
Incorrect Time Clock not set Set the clock
Battery is inserted incorrectly,
or depleted
Check/replace the battery
Alarm does not turn on Alarm is not set to turn on
Activate ALARM 1 or ALARM 2
Clock is not set Set the clock
Alarm time is not set Set alarm time for
ALARM 1 or ALARM 2
No display Dimmer is set to Standby Mode Press Dimmer button