Product Specifications
The World Depends on Sensors and Controls
OFFICES
2211 West Casino Road
Everett, Washington 98204 USA
425-353-8833
4467 White Bear Pkwy
St. Paul, MN 55110 USA
800-553-6418
www.SensataPower.com
ME SERIES SPECIFICATIONS
ME2012 ME2512
ME3112
INVERTER SPECIFICATIONS
Input battery voltage range 9 - 16 VDC 9 - 16 VDC 9 - 16 VDC
Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5%
Output frequency and accuracy 60 Hz ± 0.1 Hz 60 Hz ± 0.1 Hz 60 Hz ± 0.1 Hz
1 msec surge current (amps AC) 60 100 120
100 msec surge current (amps AC) 37 45 50
5 sec surge power (real watts) 3700 5000 6000
30 sec surge power (real watts) 3450 4500 4800
5 min surge power (real watts) 3100 3500 3950
30 min surge power (real watts) 2400 2900 3500
Continuous power output at 45° C 2000 VA 2500 VA 3100 VA
Maximum continuous input current 266 ADC 333 ADC 413 ADC
Inverter efficiency (peak) 95% 91% 90%
Transfer time 16 msecs 16 msecs 16 msecs
Search mode (typical) 5 watts 5 watts 5 watts
No load (120 VAC output, typical) 20 watts 23 watts 25 watts
Waveform Modified Sine Wave Modified Sine Wave Modified Sine Wave
CHARGER SPECIFICATIONS
Continuous output at 45° C 100 ADC 120 ADC 160 ADC
Charger efficiency 85% 85% 85%
Power factor > .95 > .95 > .95
Input current at rated output (AC amps) 15 18 22
GENERAL FEATURES AND CAPABILITIES
Transfer relay capability 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection Yes, with two overlapping circuits
Overtemperature protection Yes on transformer, MOSFETS, and battery
Corrosion protection Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Dual AC branch rated output breakers Optional on the ME2012 - AC breakers in 20 amp ratings
Listings ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
Warranty Three years
ENVIRONMENTAL SPECIFICATIONS
Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non-condensing
PHYSICAL SPECIFICATIONS
Dimensions (l x w x h) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Mounting Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed
Weight 37 lb (16.8 kg) 41 lb (18.6 kg) 46 lb (20.9 kg)
Shipping weight 46 lb (20.9 kg) 41 lb (18.6 kg) 56 lb (25.5 kg)
Max operating altitude 15,000’ (4570 m)
Testing for specifications at 25° C
Specifications subject to change without notice.
February 2017 Rev H Part #64-0100