Installation Manual

© 2010 Magnum Energy, Inc.
15. AC Output Connection - AC knockout (output) for
hardwiring.
16. AC Input Connection
- AC knockout (input) for hardwiring.
17. DC Ground Terminal - this connection is used to tie the
exposed chassis of the inverter to the DC grounding system. This
terminal accepts CU/AL conductors from #14 AWG to #6 AWG.
Battery Temperature Sensor
A plug-in external Battery Temperature Sensor (BTS) is provided
for units with the battery charger feature. When installed, the
BTS automatically adjusts the battery charger’s BULK, ABSORB,
and FLOAT voltage set-points (based on temperature) for better
charging performance and longer battery life. If the temperature
sensor is NOT installed and the batteries are subjected to large
temperature changes, battery life may be shortened.
Figure 4, Left Side Features
FRONT VIEW
SIDE VIEW
~2"
~1"
~½”
0.375" diameter
Cable
~¾”
16
17
15
5
1.0 Introduction
Figure 5, Battery Temperature Sensor (BTS)