Installation Manual

2.0 Installation

Figure 8, MM-AE Series Inverter/Charger Dimensions

Mounting holes x 4

[¼” (0.25") diameter]

10.0"

~ 16

5/8"

(16.59")

~ 6 3/4" (6.71")

~ 8 7/16" (8.41")

~ 7 ½" (7.51")

~ 4

11/16"

(4.66")

Wiring Guidelines

• Before connecting any wires, determine all wire routes to and

from the inverter throughout the home or cabin.

• Conductors passing through walls or other structural members

must be protected to minimize insulation damage such as

chaﬁ ng, which can be caused by vibration or constant rubbing.

• Always check for existing electrical, plumbing, or other areas

of potential damage prior to making cuts in structural surfaces or

walls.

• Make sure all wires have a smooth bend radius and do not be-

come kinked.

• Both AC and DC overcurrent protection must be provided as part

of the installation.