Product Specifications

The World Depends on Sensors and Controls
OFFICES
2211 West Casino Road
Everett, Washington 98204 USA
425-353-8833
4467 White Bear Pkwy
St. Paul, MN 55110 USA
800-553-6418
www.SensataPower.com
MS-E SERIES INVERTER/CHARGER SPECIFICATIONS
MS1512E
MS2712E
INVERTER SPECIFICATIONS
Input battery voltage range 9 - 17 VDC 9 - 17 VDC
Nominal AC output voltage 230 VAC ±5% 230 VAC ±5%
Output frequency and accuracy 50 Hz ± 0.4 Hz 50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD) < 5% < 5%
1 msec surge current (amps AC) 40 45
100 msec surge current (amps AC) 15 21
5 sec surge power (real watts) 3100 4100
30 sec surge power (real watts) 2800 3750
5 min surge power (real watts) 2200 3600
30 min surge power (real watts) 1800 3500
Continuous power output at 25° C 1500 VA 2700 VA
Maximum continuous input current 200 ADC 360 ADC
Inverter efficiency (peak) 89% 86%
Transfer time ~ 20 ms ~ 20 ms
Search mode (typical) 8 watts 9 watts
No load (230 VAC output, typical) 20 watts 34 watts
Waveform Pure Sine Wave Pure Sine Wave
CHARGER SPECIFICATIONS
Continuous output at 25° C 75 ADC 125 ADC
Charger efficiency (peak) 86% 83%
Power factor > .95 > .95
Input current at rated output (AC amps) 4.5 8.5
GENERAL FEATURES AND CAPABILITIES
Transfer relay capability 30 amps AC
Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation Yes, 4.6 m (15’) Battery Temp Sensor standard
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection Yes, with two overlapping circuits
Overtemperature protection Yes on transformer, MOSFETS, and battery
Conformal coating on PCB’s for corrosion protection Yes
Powder coated chassis & top for corrosion protection Yes
Stainless steel fasteners for corrosion protection Yes
Listings CE
Warranty Two years
ENVIRONMENTAL SPECIFICATIONS
Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non-condensing
PHYSICAL SPECIFICATIONS
Dimensions (l x w x h) 34.9 cm x 32.1 cm x 20.3 cm (13.75” x 12.65” x 8.0”)
Mounting Shelf (top or bottom up) or wall
Unit weight 19.1 kg (42 lb) 25.0 kg (55 lb)
Shipping weight 23.2 kg (51 lb) 28.2 kg (62 lb)
Max operating altitude 4570 m (15,000’)
Testing for specifications at 25° C. Specifications subject
to change without notice.
December 2016 Rev F Part #64-0200