Installation Manual

Page 10

Setup

3.2 Remote Buttons and Menu Items

The ﬁ ve menu buttons (FAVS, CTRL, METER, SETUP, or TECH) allow the inverter/charger system

to be conﬁ gured to your speciﬁ c preferences. These buttons also allow you to access menu items

that can help with monitoring and troubleshooting your system. Refer to Figure 3-2 for an ex-

ample on how to navigate the remote.

This section covers each menu button’s function and its various conﬁ gurable settings. This helps

optimize the operation of the inverter/charger.

3.2.1 FAVS Button and Menus

The FAVS (FAVORITES) button is similar to a Favorites button on your TV remote. It enables you

to store the most frequently used menu items for quick reference, or to make easy changes to the

system. The menu items stored under the FAVS button should be those menus most often used.

The FAVS button has ﬁ ve factory-stored default menu items. You can also access these menu

items using the SETUP and CTRL buttons to make changes. Before changing the default FAVS

menu items, it is suggested that you thoroughly review all the menu items on the menu map (see

Figures 4-1 through 4-5) and make a short list of the items you think you will use most often.

Once you decide which ﬁ ve items you would like to make as your favorites, determine the order

in which those menus are to appear under the FAVS button. This is important since you will assign

a FAVS position (F1-F5) for each menu item you select.

Menu items can be changed at any time under the FAVS button. Navigate to a menu item that you

would like to set as a favorite, then push and hold the FAVS button for three seconds. The screen

displays “Select FAV: F1” on the bottom line. Rotate the SELECT knob to select the location for

the menu item (i.e., F1 - F5). Once you have decided the location for the menu item, press the

SELECT knob to save that menu item at the selected FAVS location. Repeat as necessary to save

additional menu items.

Info: The FAVS button can be used to store menu items that would otherwise not be

accessible after a PIN has been set for the SETUP menu. See the TECH: 05 SETUP PIN

section on page 38 for information on setting a security PIN.

Info: Menu headings cannot be selected and stored in FAVS, only menu items. Menu

headings are identiﬁ ed with a number. Menu items are identiﬁ ed by a number followed

by a letter. See examples below.

Info: If the menu selected to be stored under the FAVS button is not a valid option, the

remote displays “Cannot be FAV”.

Status

02 Invert Setup

02A Search Watts

5 Watts

Example: 02 Invert Setup is a menu heading.

Example: 02A Search Watts is a menu item.