Specifications

Shutdown and Cleaning
313034H 19
NOTE: Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
13. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering gun
into waste pail until flushing
fluid dispensed from gun is
relatively clear.
14. Stop triggering gun. Engage the
trigger lock.
15. Turn prime/spray valve to
Prime.
16. Turn power switch OFF.
17. Clean InstaClean Fluid Filter
and gun, page 22.
18. Fill unit with Pump Armor
™
storage fluid. Read Long
Term Storage, page 23.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
ti9345a
ti5580a
ti8909a
ti9745a
ti8908a
ti9346a
ti2018a